ArcSoft PDA Phone - Manual (Page 225)

Managing Your PDA Phone 225
To open Sprite Backup
• On your device, tap Start > Programs > Sprite Backup.
Sprite Backup can operate in two different modes: Basic mode and
Advanced mode. The first time you run Sprite Backup, it will be in Basic
Mode. To switch between the modes, tap Options then select the desired
mode.
Basic mode Advanced mode
Basic mode
Basic mode is the default mode, and allows you to easily back up your entire
Pocket PC with the tap of a button.
Note To change backup options or location, you will need to do it in Advanced
mode.
To back up data in Basic mode
1. On the Basic mode screen, tap Backup Now.
2. Specify a password (between 6 to 15 characters in length) for the
backup file. Enter this password twice, then tap OK.
3. Follow the on-screen instructions to complete the backup.
To restore data in Basic mode
1. On the Basic mode screen, tap Restore Now.
2. Enter the password for the backup file, then tap OK.
3. Follow the on-screen instructions to complete the restoration process.