Rs232 program port (front panel), Pin program port (rear panel), Icsnet rj-45 connections/wiring – AMX NetLinx Master-Ethernet Card/Module NXC-ME260 User Manual
Page 16
Installation and Wiring
10
NXC-ME260 NetLinx Master-Ethernet Card/Module
RS232 Program port (front panel)
The following table shows the front panel RS232 (DB9) Program Port connector (male), pinouts,
and signals.
5-Pin Program port (rear panel)
The table below lists the pinouts and signals for the grey rear panel 5-pin 3.5 mm mini-Phoenix
Program port connector.
ICSNet RJ-45 Connections/Wiring
The following table shows the pinouts, signals, and pairing information to use for ICSNet RJ-45
connections. The ICSNet connections provide power and data to ICSNet devices. Each port
provides up to 500 mA of current.
RS232 Program Port, Pinouts, and Signals
Program Port Connector
Pin
Signal
2
RX
3
TX
5
GND
7
RTS
8
CTS
5-Pin Program Port Pinouts and Signals
Pin
Signal
1
GND
2
RX
3
TX
4
CTS
5
RTS
ICSNet RJ-45 Signals
Pin
Signal-Master
Signal-Device
1
TX +
RX +
2
TX -
RX -
3
N/A
N/A
4
GND
GND
5
N/A
N/A
6
N/A
N/A
7
RX +
TX +
8
RX -
TX -
5
4
3
2
1
9
8
7
6
Male