AMD SimNow Simulator 4.4.5 - Manual (Page 156)

AMD Confidential
User Manual November 21
st
, 2008
144 Chapter 9: Logging
9.3 I/O Logging
This is a generic feature available on all devices for logging slave accesses (i.e. accesses
responded to by this device). Several categories of generic I/O logging are available.
Logging is performed to the I/O loggers (see Section 9.1, "Message Log", on page 141)
of names similar to the device you are enabling the logging for.
Caveat: Currently, devices which route to other devices may appear as if they are
responding to the messages themselves, so bridge devices will likely log
everything that is behind them.
Figure 9-3: I/O Logging Dialog
Log PCI Config Space Accesses
Checking this will log PCI Config Space accesses made to the device.
Log I/O Space Accesses
Checking this will log I/O Space accesses made to the device. These are the accesses
made with the x86 IO read/write instructions.
Disable Fastpath I/O when Logging
This item, checked by default, disables the Fastpath I/O mechanism when I/O Space
Accesses logging is enabled. If this is unchecked, accesses may not appear in the log.
Log Memory Space Accesses
Checking this will log Memory Space accesses made to the device. These are the
accesses corresponding to standard x86 move, read and write instructions to memory.
Disable Fastpath Memory when Logging