AMD SimNow Simulator 4.4.5 - Manual (Page 70)

AMD Confidential
User Manual November 21
st
, 2008
58 Chapter 7: Device Configuration
7.2 Debugger Device
The debugger allows debugging tasks such as break-pointing, single-stepping, and other
standard tasks.
Interfaces
The debugger has no interfaces; the debugger is present if it is in the Device Window. To
add the Debugger Device follow these steps:
1. Select “View→Show Devices”.
2. Click and drag the Debugger Device icon from the device list on the left side
into the workspace area on the right side of the Device Window.
3. Add an additional debugger for each processor you wish to debug.
Initialization and Reset State
The debugger initially is disabled and attached to processor 0.
Configuration Options
In the Main Window, select “View→Show Debugger”. Click the Attach button to
configure which processor is being debugged.
To use the CPU Debugger, please refer to Section 10.1, “Using the CPU Debugger”, on
page 147.
Log Messages
This device does not create log messages.