AMD SimNow Simulator 4.4.5 - Manual (Page 68)

AMD Confidential
User Manual November 21
st
, 2008
56 Chapter 7: Device Configuration
Figure 7-1: AweSim Processor-Type Properties
Figure 7-2 shows the Logging tab for the AweSim processor device. Here you can
specify the following configuration options:
Check the Log Disassembly check box to log
the disassembly of the instructions executed
by the processor model.
Check the Log Register State Changes check box to log all the processor model register
state changes.
Check the Log I/O Read/Writes check box to log all real I/O (not memory I/O) generated
by the processor model.
Check the Log Linear Memory Accesses check box to log all memory accesses based on
linear memory. This logs all 'data' memory accesses generated by the processor model.
This does not log code fetch memory accesses, nor 'physical' memory accesses (for
example, page table access-and dirty-bit updates).
Check the Log Exceptions check box to log all exceptions generated by the processor
model.