AMD SimNow Simulator 4.4.5 - Manual (Page 233)

AMD Confidential
User Manual November 21
st
, 2008
Appendix A 221
Instruction
Supported
Mnemonic Opcode Description
IRETD CF Return from interrupt (32-bit operand size). 1
IRETQ CF Return from interrupt (64-bit operand size). 1
LAR reg16,reg/mem16 0F 02 /r
Reads the GDT/LDT descriptor referenced by
the
16-bit source operand masks the
attributes with FF00h and saves the result
in the 16-bit destination register.
LAR reg32,reg/mem16 0F 02 /r
Reads the GDT/LDT descriptor referenced by
the
16-bit source operand masks the
attributes with 00FFFF00h and saves the
result in the 32-bit destination register.
LAR reg64,reg/mem16 0F 02 /r
Reads the GDT/LDT descriptor referenced by
the
16-bit source operand, masks the
attributes with 00FFFF00h and saves the
result in the 64-bit destination register.
LGDT mem16:32 0F 01 /2
Loads mem16:32 into the global descriptor
table register.
LGDT mem16:64 0F 01 /2
Loads mem16:64 into the global descriptor
table register.
LIDT mem16:32 0F 01 /3
Loads mem16:32 into the interrupt descriptor
table register.
LIDT mem16:64 0F 01 /3
Loads mem16:64 into the interrupt descriptor
table register.
LLDT reg/mem16 0F 00 /2
Load the 16-bit segment selector into the
local descriptor table register and load the
LDT descriptor from the GDT.
LMSW reg/mem16 0F 01 /6
Loads the lower 4 bits of the source into
the lower 4 bits of CR0.
LSL reg16,reg/mem16 0F 03 /r
Loads a 16-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LSL reg32,reg/mem16 0F 03 /r
Loads a 32-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LSL reg64,reg/mem16 0F 03 /r
Loads a 64-bit general-purpose register with
the segment limit or a selector specified in
a 16-bit memory or register operand.
LTR reg/mem16 0F 00 /3
Load the 16-bit segment selector into the
task register and load the TSS descriptor
from the GDT.
MOV CRn,reg32 0F 22 /r
Move the contents of a 32-bit register to
CRn.
MOV CRn,reg64 0F 22 /r
Move the contents of a 64-bit register to
CRn.
MOV reg32,CRn 0F 20 /r
Move the contents of CRn to a 32-bit
register.
MOV reg64,CRn 0F 20 /r
Move the contents of CRn to a 64-bit
register.
MOV DRn,reg32 0F 21 /r
Move the contents of a 32-bit register to
DRn.
MOV DRn,reg64 0F 21 /r
Move the contents of a 64-bit register to
DRn.
MOV reg32,DRn 0F 23 /r
Move the contents of DRn to a 32-bit
register.
MOV reg64,DRn 0F 23 /r
Move the contents of DRn to a 64-bit
register.
RDMSR 0F 32 Copy MSR specified by ECX into EDX:EAX.
RDPMC 0F 33
Copy the performance monitor counter
specified by ECX into EDX:EAX.
RDTSC 0F 31 Copy the time-stamp counter into EDX:EAX.
RSM 0F AA Resume operation of an interrupted program.
1 See Section A.6.3.2, “IRET – Return from Interrupt”, on page 225.