AGFA 2100 - Manual (Page 104)

4.5.2.2 Automatic New Line (autoNL)
The autoNL feature determines whether or not the printer wraps to the
next line when it reaches the right margin.
4.5.3 COPY Menu
The COPY menu (Table 4–10) determines the number of copies to be
printed. You can save this setting only in RAM.
Table 4–10: COPY Menu Features and Values
Feature Values Description
copy 01 1 –99 Sets the number of copies to be printed.
1 Factory default setting.
4.5.4 COMMAND Menu
The COMMAND menu (Table 4–11) lets you display messages on the control
panel in your native language. Three types of messages are displayed in
the desired language: status, operator call, and error messages. Service
call messages and menus are displayed only in English.
You cannot select this setting using escape sequences from the host
computer. You must select it from the control panel. You can save the
setting only in NVRAM.
Table 4–11: COMMAND Menu Features and Values
Feature Values Description
message English 1
Finnish
French
German
Italian
Japan
Norway
Port.
Spanish
Swedish
Danish
Dutch
Displays messages in the selected language.
1 Factory default setting.
4–22 DEClaser 2100 Printer Operator’s Guide