AGFA 2100 - Manual (Page 71)

Test Print B is printed continuously (until instructed to stop) so it can also
be used to test paper feed, paper delivery, and other mechanical functions
of the printer.
Use the procedure in Table 2–4 to print a copy of Test Print B.
Table 2–4: Printing Test Print B
Operation Display Reads
1. Press On Line to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press and hold down Test/Font
for about three seconds.
— The test page prints
continuously.
01 TEST PRINT B
3. Press Test/Font to stop
printing Test Print B.
NOTE: You can also press
On Line to stop printing
Test Print B.
04 TEST STOP
#
00 READY
4. Press On Line to place the
printer back on line.
— The On Line indicator
lights.
00 READY
Operating Information 2–45