3 transparency specifications, Table 5–3: transparency sizes, Table 5–4: transparency specifications – AGFA 2100 User Manual
Page 120
5.3 Transparency Specifications
Table 5–3 and Table 5–4 contain information on the sizes and specifications
of transparencies that can be used with the DEClaser 2100 printer.
Table 5–3: Transparency Sizes
Transparency Size
Dimensions
A4
210 mm x 297 mm
Letter
8 ½" x 11"
Table 5–4: Transparency Specifications
Category
Specification
Transparency weight
60 g/
m
2
to 135 g/
m
2
basis weight
(16 lb. to 36 lb.)
Thickness
0.075 mm to 0.115 mm
Moisture content
5% to 8%
Smoothness
100–300 Sheffield
Heat tolerance
200°C (392°F) for 0.1 second
Electrical resistance
1.0 x
10
11
ohm-cm–2.0 x
10
12
ohm-cm (cubic content)
2.0 x
10
10
ohm-cm–2.0 x
10
11
ohm-cm (surface)
5.3.1 Special Considerations When Printing Transparencies
Observe the following requirements when printing on transparencies:
•
Transparencies are usually fed manually.
If you are feeding
transparencies from a cassette,
be sure they are high-quality
transparencies and meet the specifications listed in Table 5–4.
•
Remove transparencies from the rear output tray as each one is printed
to prevent them from sticking to each other.
5–8
DEClaser 2100 Printer Operator’s Guide