HP Integrity NonStop H-Series - Manual (Page 33)

Installing and Configuring the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
2- 13
Installing the Rear Cover
Installing the Rear Cover
The tape drive has a rear cover that needs to be attached. Figure 2-12 is a
picture of the rear cover. The purpose of the is to protect the Back End Board
(BEB) and the fiber cabling.
The rear cover will be shipped with the following components:
•
Rear Cover
•
Push Rivets
Figure 2-13 is a picture of the push rivets.
Figure 2-12. Tape Drive Rear Cover
Figure 2-13. Push Rivets