HP Integrity NonStop H-Series - Manual (Page 39)

Operating the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
3 -5
Buttons
Initialization Screens
After the POST completes, the library robotics server begins initialization and
displays a series of screens. For an example see
Figure 3-3 .
Default Screen
After the POST diagnostics conclude successfully, and initialization is complete,
the default screen appears. See
Figure 3-4 .
The first line of the Default screen shows the status of the DLT tape drive within
the tape drive. Possible status conditions are:
•
No Tape
•
Idle
•
Rewinding
•
Seeking
•
Reading
•
Writing
•
Erasing
Figure 3-2. POST Screen
Figure 3-3. Initialization Screen
Figure 3-4. Default Screen