HP Integrity NonStop H-Series - Manual (Page 67)

Maintaining the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
5 -3
Running From the Front Panel
3. Press Enter once to select Clean Drive. The screen in Figure 5-3 appears.
4. Line 2 is not scrollable. Press Enter once to accept DLT1. The cursor moves
to line 4 of the display. The choices available on Line 4 are slots 1 through 5
or 1 through 10. Press Enter again to use the cleaning cartridge in slot 1.
1. The Cleaning Confirmation screen appears.
2. As the confirmation screen indicates, to execute the cleaning operation,
press Enter. If the confirmation screen does not show the intended drive and
cleaning cartridge, press Escape to return to the Cleaning menu. When you
press Enter, the In Progress screen appears.
When the cleaning operation is finished, the Default screen reappears.
Figure 5-3. Maintenance Menu
Note. If slot 1 can not to be used for the cleaning cartridge, scroll to line 4 to select another
slot. If reserved slots have been set up, line 4 refers to cleaning slot 1, which is the first
reserved slot.
Figure 5-4. Cleaning Confirmation Screen
Figure 5-5. Cleaning in Progress