HP Designjet T120 ePrinter - Manual (Page 108)

If the printer stops for a paper mismatch, you can decide among the following alternatives:
● Load the correct paper and resume printing.
● Print the job on the already-loaded paper. The print may be clipped if the paper is not large
enough.
● Cancel the job.
The roll has jammed
When a paper jam occurs, you normally see a message about it in the front-panel display.
1. Open the top cover.
2. Try to move the printhead carriage out of the way.
3. Carefully remove any of the jammed paper that you can lift up and out from the top of the printer.
100 Chapter 12 Troubleshooting paper issues ENWW