Cannot insert an ink cartridge, Ink cartridge status messages, Cannot insert the printhead – HP Designjet T120 ePrinter User Manual
Page 127
Cannot insert an ink cartridge
1.
Check that you have the correct type of cartridge (model number).
2.
Check that the colored label on the cartridge is the same color as the label on the slot.
3.
Check that the cartridge is correctly oriented, with the letter or letters marking the cartridge label
right-side up and readable.
CAUTION:
Never clean inside the ink cartridge slots.
Ink cartridge status messages
These are the possible ink cartridge status messages:
●
OK: The cartridge is working normally, with no known problems.
●
Missing or Damaged: There is no cartridge present, or it is not correctly connected to the
printer (shown with an X on the status screen).
●
Low: The ink level is low.
●
Out of ink: The cartridge is empty.
●
Not genuine HP: The cartridge is not a genuine HP cartridge.
●
Wrong slot: The cartridge has been inserted into the wrong slot.
●
Incompatible: The cartridge is incompatible with this printer.
Cannot insert the printhead
1.
Check that you have the correct type of printhead (model number).
2.
Check that you have removed the orange protective cap from the printhead.
3.
Check that the printhead is correctly oriented.
4.
Check that you have correctly latched the printhead, see
Replace the printhead on page 82
.
ENWW
Cannot insert an ink cartridge
119