HP Designjet T120 ePrinter - Manual (Page 35)

Access the HP Utility
The HP Utility enables you to manage your printer from a computer with a USB, TCP/IP, or Wi-Fi
connection.
● Under Windows, start the HP Utility from your desktop shortcut or from Start > All Programs
> Hewlett-Packard > HP Designjet Utility > HP Designjet Utility. This launches the HP
Designjet Utility, showing the HP Designjet printers installed on your computer.
● Under Mac OS X, launch the HP Utility from your dock shortcut or by selecting
STARTUP_DISK > Library > Printers > hp > Utilities > HP Utility. This launches the HP
Utility, showing the HP Designjet printers installed on your computer.
When you select your printer in the left pane, everything that appears in the right pane is specific
to that printer.
Change the language of the HP Utility
The HP Utility can work in the following languages: English, Portuguese, Spanish, Catalan (Windows
only), French, Italian, German, Russian, Simplified Chinese, Traditional Chinese, Korean, and
Japanese.
● Under Windows, the language will be adjusted to your regional language settings as defined
in the Windows Control Panel.
● Under Mac OS X, the language is changed as for any other application. In System
Preferences, select International and re-launch the application.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep
mode to save power. To change the time the printer waits before it goes into sleep mode, go to the
front panel and press , then Printer preferences > Sleep. Select the wait time you want and then
press OK; you can set the time from 5 to 240 minutes. The default time is 30 minutes.
Change the auto-off setting
You can use the printer's auto-off feature to turn the printer off automatically. For example, setting it to 2
hours would turn the printer off after 2 hours of inactivity. In this way, you can save more energy.
However, the auto-off feature is automatically disabled when the printer is connected to a network, to
avoid inconveniencing network users.
If you are using a USB connection, you can set the printer to turn itself off completely after 2 to 12
hours of inactivity. At the front panel, press , then Printer preferences > Auto-off.
Change the front-panel display brightness
To change the brightness of the front-panel display, press , then Printer preferences > Display
brightness, and select a value you want. Press OK to set the value. The default brightness is set to
50.
ENWW Access the HP Utility 27