HP Designjet T120 ePrinter - Manual (Page 47)

3. Adjust the output tray extensions depending on the length of the paper.
4. Load sheets of paper into the tray with the printed side facing outwards. Ensure that the sheets are
all of the same size.
5. Adjust the tray to fit the width of the paper.
View information about the paper
To view the loaded paper information, press the icon of the active paper source.
The following information is displayed on the front panel:
● Paper type you have selected
● Roll or sheet status
● Width of the paper in millimeters (estimated)
ENWW View information about the paper 39