Advanced settings, Advanced settings -16 – HP Storage Mirroring V4.5 Software User Manual
Page 122
8 - 16
Advanced settings
The following options allow you to control what functions Application Manager will perform during
configuration. By default, Application Manager performs all of these functions. Individual functions
should only be disabled for testing or debugging purposes.
1.
Select the Server Name checkbox if you want the source name to be added to the target when
failover occurs (Default = selected).
2.
Select the Shares checkbox if you want the source file shares to be added to the target when
failover occurs (Default = NOT selected).
3.
Select the Active Directory Hostname (SPNs) checkbox if you want to remove the host SPN
(Service Principle Name) automatically from Active Directory for the source and add it to Active
Directory for the target during failover (Default = selected).
4.
Select the Create Replication Set checkbox to automatically create a replication set that
includes all of the necessary directories/files that must be protected for your specific
configuration. This should only be disabled if you have customized your replication set and do
not want to overwrite it (Default = selected).
5.
Select the Create Failover Scripts checkbox to automatically generate the failover/failback
scripts and copy them to the appropriate server. This should be disabled only if you have
customized your script files and do not want them to be overwritten (Default = selected).
6.
Select the Create Connection checkbox to create the connection between the source and
target using the automatically-generated replication set. This should only be disabled if you
would like to verify the replication set that is created by Application Manager prior to connection
(Default = selected).
7.
Select the Create Failover Monitor checkbox to create a failover monitor on the target to
monitor the source for failure. This monitor will use the failover parameters specified during
configuration as well as the script files that have been created (Default = selected).
NOTE:
These options are only available when you launch Application Manager using the
command line
/blackberry /advanced
option (
dtam /blackberry /advanced
).
NOTE:
If you are using Active Directory, you should enable this option. Otherwise, you may
experience problems with failover.