HP Storage Mirroring V4.5 Software - Manual (Page 31)

3 - 9
Modifying the default configuration for services may affect whether data can be successfully
replicated. Do not modify the services to start/stop unless you are very familiar with Storage
Mirroring and Exchange.
1. To add a service, click Add. The Add Service window will appear.
2. Select the Service name from the drop-down box, then click Add; or, type the name of a
service, then press Enter.
3. If available, select the Service must be stopped on target checkbox. Most services must be
stopped on the target for replication to occur properly.
4. When you are finished entering services, click Close to return to the Failover configuration
window.
5. To remove a service, select one or more services, then click Remove.
You can only remove services that you added manually using the Application Manager.
6. Services will be started in the displayed order (top-to-bottom starting with the left column) and
shutdown in reverse order (bottom-to-top starting with the right column). To re-arrange the
order in which services are started/stopped:
a. Add any additional services.
b. Select a service in the list, then use the up and down arrow buttons to move the service to
the appropriate position in startup/shutdown order.
Resources (cluster only)
If you are using clustered Exchange servers, you will select resources instead of services to bring
online and offline during failover. The Resource selection works exactly like the service selection
functionality.
NOTE: If you are using Exchange in a cluster-to-standalone configuration and have selected a
source cluster server, a button will appear in the Services/Resources area, allowing you
to toggle between services to start/stop on the target, and Resources to start/stop on the
source.