HP Storage Mirroring V4.5 Software - Manual (Page 151)

B - 3
Rebuilding the original SQL source
1. Verify that your source machine is not connected to the network. If it is, disconnect it.
2. Resolve the source machine problem that caused the failure.
3. If you must rebuild your hard drive, complete the following.
a. Install Windows. Since your source machine is not connected to the network, go ahead and
use the source’s original name and IP address.
b. Install Storage Mirroring using the installation defaults.
c. Install SQL using the same drive and directory settings as were used on the original source.
4. Continue the failback and restoration process.