Change application manager preferences, Change application manager preferences -4 – HP Storage Mirroring V4.5 Software User Manual
Page 21
2 - 4
Change Application Manager preferences
To change display preferences for the Application Manager, select Tools, Options. The Options
dialog box will appear.
1.
In the Service Listen Port field, enter the value for the Storage Mirroring port to be used for
Application Manager communication. The default port is 6320.
2.
To specify the rate at which the Application Manager updates the protection status, clear the
Enable automatic adjustment of refresh interval checkbox, then enter the desired Refresh
Interval. You can enter a value between 1 and 30,000 seconds.
3.
If you want the refresh interval to be updated automatically, select the Enable automatic
adjustment of refresh interval checkbox.
4.
In the Maximum log file size field, enter the maximum size for the dtam.verbose.log file.
When the maximum size is reached, the dtam.verbose.log file is renamed to
dtam.verbose.prev.log and subsequent actions are logged to a new dtam.verbose.log file
(Default = 1 MB).
5.
Select the Enable verbose logging checkbox to have all user interactions with Application
Manager logged to the dtam.verbose.log file (Default = selected).
6.
Select the Always show protection details checkbox to have the Protection Details section on
the Monitor tab expanded by default.
7.
Select the Display statistics values in bytes checkbox if you always want to show the values
on the Protection Details section on the Monitor tab values in bytes, rather than in MB, GB, or
TB.
8.
Select the Load last selected server upon startup checkbox to automatically reconnect to the
last protected source/target pair when Application Manager is re-started.
NOTE:
The Storage Mirroring Application Manager Service Listen Port must be the same as
the Storage Mirroring Service Listen Port on both the source and target servers.
You can also change the port through the Storage Mirroring Management Console.
NOTE:
If the Application Manager appears to be running slowly, it may be because the
refresh interval is set to a long interval. Set a shorter refresh interval and make sure
that the automatic adjustment option is not selected.