HP xw4400 Workstation - Manual (Page 101)

Using Remote Graphics Software
93
RGSENDER_CONNECT A new connection was established with an
associated name. If Easy Login is enabled, the
name assignment will be deferred until login and
the associated name may be “Anonymous”.
Event Viewer Message:
Connect %1.
Strings:
%1 = name associated with connection
Data:
None
Event Viewer Example:
Connect MYDOMAIN\myusername.
RGSENDER_DISCONNECT A receiver has disconnected. The message will
contain the name associated with the
connection. If Easy Login is enabled and the
receiver disconnects prior to a login, the
associated name may be “Anonymous”.
Event Viewer Message:
Disconnect %1.
Strings:
%1 = name associated with connection
Data:
None
Event Viewer Example:
Disconnect MYDOMAIN\myusername.
RGSENDER_STARTUP Reference event registered to aid in
interpretation of the event log by Event Viewer.
Signifies proper startup of the RGS Sender
service.
Event Viewer Message:
RGS Sender startup.