HP xw4400 Workstation - Manual (Page 69)

Using Remote Graphics Software
61
Organizing Displays
Directory Mode is usually intended for a system with multiple displays attached. For
example, if the Receiver connects to two Senders, then at least two displays should
be available on the local system. Each Sender can then display on its own monitor.
The Receiver allows the user to easily move and position the Remote Display Window
on the local desktop using Setup Mode. For optimal viewing the display resolution of
the Sender and Receiver should be set to the same values. If the resolution of the
display connected to the local system is less than display resolution of the remote
system, the image will be cropped by the local display.