HP xw4400 Workstation - Manual (Page 27)

Getting Started with Remote Graphics Software
19
2. On the menu bar select "Go/Autostart".
3. A new Konqueror window will open. Right click and select "Create New" and
choose "Link to Application".
4. A dialog box will open. On the General Tab page, give it a name such as
"rgsender".
5. On the Execute Tab page, add the following in the Command text edit box :
/opt/hpremote/rgsender/rgsender_gui.sh
6. Click the "OK" button to save the changes.
7. Logout and log back in and you should see the RG Sender GUI.
GNOME RedHat Enterprise GUI setup
To section describes how to start the Sender GUI when Gnome is the desktop
manager.
1. Open the Nautilus file manager (the desktop icon that is named "Start Here")
2. Select the "Preferences" icon.
3. Select the "Session" icon.
4. Select the "Session Properties & Startup Programs" icon. A new dialog window
will open.
5. Select the "Startup Programs" Tab in the new dialog window
6. Click the "Add" button. A new dialog window will open.
7. In the "Startup Command" text edit box in the new dialog window enter:
/opt/hpremote/rgsender/rgsender_gui.sh --display :0.0
8. Select the "OK" button.
9. Select the "Apply" button.
10. Logout and log back in and you should see the RG Sender GUI.
Optionally, you can also setup Gnome so the icon does not show up on the task bar -
the following instructions do not apply for RedHat Enterprise Edition systems.
1. Go back to the Nautilus file manager, select "Preferences" and then select
"Sawfish window manager."
2. Select "Matched Windows". A new dialog window will open.
3. Click the "Add" button. A new dialog window will open.
4. In the "Matchers" window select the down arrow button and select "Name" in the
left text edit window.
5. In the corresponding text edit window on the right enter the following
"rgsender_gui"