HP 3PAR Application Software Suite for Oracle - Manual (Page 157)

MESSAGE ID
1012
SYMBOLIC NAME
RMO_ERROR_MULTIPLE_PARTITION
MESSAGE
3PAR1012: ERROR: Disk <disk ID> has multiple partitions.
REASON
In Linux, the specified disk has multiple partitions defined.
SOLUTION
Multiple partitions are not supported by Recovery Manager for Oracle. This is to avoid the possible
rollback overwriting the data on other partitions.
MESSAGE ID
1013
SYMBOLIC NAME
RMO_ERROR_TARGET_PWWN_NOTFOUND
MESSAGE
3PAR1013: ERROR: Could not find target port WWN for port <port number>.
REASON
Could not find an entry from the HP 3PAR OS CLI commands showport or showport
-iscsiname
. This will affect rmora_mount or rmora_umount operations.
SOLUTION
Verify if the specified host port exists from the HP 3PAR CLI command showhost output. Also
verify if the port WWN from the same output matches with port WWN from the host. Contact
customer support for further investigation.
MESSAGE ID
1015
SYMBOLIC NAME
RMO_ERROR_NOT3PARDISK
MESSAGE
3PAR1015: ERROR: Device '%s' is not an HP 3PAR device.
REASON
When performing a SCSI inquiry, the specified device found is not an HP device.
SOLUTION
Normally this error can be ignored if it only appears in the Recovery Manager for Oracle log file,
as Recovery Manager for Oracle performs a SCSI inquiry for all disks to search for HP 3PAR disks.
For Recovery Manager for Oracle to work, datafiles and archive log files must reside on HP 3PAR
volumes.
MESSAGE ID
1017
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_TPDHOST
MESSAGE
3PAR1017: ERROR: Could not retrieve host definition for '%s' server on the HP 3PAR StoreServ
Storage '%s'.
157