HP 3PAR Application Software Suite for Oracle - Manual (Page 63)

Press ENTER to accept the default value, or enter the ORACLE_HOME of the ASM instance
on the database server.
•
Oracle Home of ASM instance on the backup server [h,q]?
Recovery Manager for Oracle assumes that the ORACLE_HOME of the ASM instance on the
backup server is the same as the ORACLE_HOME of the ASM instance on the database server.
Press ENTER to accept the default value, or enter ORACLE_HOME of the ASM instance on the
backup server.
•
Do you want to setup configuration for remote copy? [y,n,q]? (y)
Select y if this is this configuration is for Remote Copy.
•
Primary/Local storage system host name [h=help,q=quit]?
Enter the system name of the primary/local HP 3PAR StoreServ Storage system that is connected
to the database server. The HP 3PAR StoreServ Storage system name can be retrieved from
the output of HP 3PAR OS Software CLI showsys command.
•
Secondary/Remote storage system host name [h=help,q=quit]?
Enter the system name of the Secondary/Remote HP 3PAR StoreServ Storage system that is
connected to the backup server. The HP 3PAR StoreServ Storage system name can be retrieved
from the output of the HP 3PAR OS Software CLI showsys command.
•
Primary/Local storage system user name [h=help,q=quit]?
Recovery Manager for Oracle requires that a HP 3PAR Operating System Software user must
be created on the primary/local HP 3PAR StoreServ Storage system to allow access from the
database server to the primary/local HP 3PAR StoreServ Storage system.
•
Secondary/Remote storage system user name [h=help,q=quit]?
Recovery Manager for Oracle requires that a HP 3PAR Operating System Software user must
be created on the Secondary/Remote HP 3PAR StoreServ Storage system to allow access from
the backup server.
•
Enter Virtual Copy retention time in days(d|D) or hours(h|H)
[h=help,s=skip,q=quit]?
Specifies the amount of time relative to the creation time that the Virtual Copy will be retained.
Input value should be a positive integer and in the range of 1 hour to 43800 hours (1825
days). d/D means days. h/H means hours. A value of 0 specifies that there is no retention
time set for read-only Virtual Copies.
This question is only prompted for HP 3PAR Operating System Software 2.3.1 or later.
•
Enter Virtual Copy expiration time in days(d|D) or hours(h|H)
[h=help,s=skip,q=quit]? (default=0d)
There are two ways to choose how to maintain the Virtual Copies in the HP 3PAR StoreServ
Storage system:
◦ Time-based policy: Enter an expiration time. When Virtual Copies expire, they are
automatically removed from the system.
To enter an expiration time, enter the amount of time, relative to the current time, that all
future Virtual Copies will expire. Valid expiration times range between 1 to 43,800 hours
(1825 days). You can specify the value in days or hours by adding either 'd' or 'D' for
Recovery Manager for Oracle Configuration Files 63