HP 3PAR Application Software Suite for Oracle - Manual (Page 158)

REASON
Failed to retrieve the hostname defined in the HP 3PAR StoreServ Storage system for the backup
system.
SOLUTION
An attempt to retrieve the host definition for the backup server on the HP 3PAR Storage system fails
because the HBA host port WWNs does not match any port WWNs of the existing host definitions
on the HP 3PAR Storage system. Either a host definition for the backup server has not been created
or the backup server is not currently connect to the HP 3PAR Storage system. Follow the HP 3PAR
Implementation Guide to setup FC/ISCSI connection between the backup server and the HP 3PAR
Storage system.
MESSAGE ID
1018
SYMBOLIC NAME
RMO_ERROR_RESOLVE_PATH
MESSAGE
3PAR1018: ERROR: Could not resolve the file path for <file name>.
REASON
Recovery Manager for Oracle fails to retrieve the real path for the specified file or directory.
SOLUTION
Check if the file or directory is valid.
MESSAGE ID
1019
SYMBOLIC NAME
RMO_ERROR_MMAP
MESSAGE
3PAR1019: ERROR: Could not establish memory mapping for file <file name>.
REASON
Failed to map the specified file to memory.
SOLUTION
Check if there is enough memory in the system. Contact customer support for further investigation.
MESSAGE ID
1020
SYMBOLIC NAME
RMO_ERROR_ARCHLOG_NOTENABLED
MESSAGE
3PAR1020: ERROR: Automatic log archiving is currently disable.
REASON
Archive log mode in the primary Oracle database is currently disabled. Certain backup types
(online, archonly, datafile) require archive log mode to be enabled.
SOLUTION
Enable the archive log mode from the primary database and try the operation again.
MESSAGE ID
1021
158 Troubleshooting