HP 3PAR Application Software Suite for Oracle - Manual (Page 175)

REASON
Failed to find next available VLUN number to create a VLUN. The HP 3PAR CLI command
createvlun
will fail if the error is not corrected.
SOLUTION
Check if the LUN being used exceeds the maximum value. If necessary, delete some unused VLUNs
to make the VLUN available.
MESSAGE ID
1135
SYMBOLIC NAME
RMO_ERROR_CONFIG_PARAM_NOTFOUND
MESSAGE
3PAR1135: ERROR: Parameter value not found from the configuration file.
REASON
An expected parameter does not exist in the configuration file.
SOLUTION
Run rmora_config or the GUI application to update the configuration. If problem persists, contact
customer support for further investigation.
MESSAGE ID
1136
SYMBOLIC NAME
RMO_ERROR_INFORM_VERSION
MESSAGE
3PAR1136: ERROR: Could not retrieve the HP 3PAR OS release version.
REASON
Cannot determine the HP 3PAR OS version.
SOLUTION
Run the showversion command against the HP 3PAR StoreServ Storage system to see what the
error is. Make sure the configuration contains valid parameter values. Run rmora_checkconfig
to verify the values.
MESSAGE ID
1137
SYMBOLIC NAME
RMO_ERROR_SNAPSHOT_DEV_NOTFOUND
MESSAGE
3PAR1137: ERROR: Could not find snapshot devices for <name>.
REASON
The command rmora_mount failed to retrieve the snapshot device from the OS for the specified
virtual volume.
SOLUTION
Contact customer support for further investigation.
MESSAGE ID
1138
SYMBOLIC NAME
175