HP 3PAR Application Software Suite for Oracle - Manual (Page 213)

MESSAGE
3PAR1341: ERROR: Failed to retrieve the client name for NetBackup policy '%s'.
REASON
The client name of a NetBackup policy cannot be retrieved using NetBackup command bppllist.
See the error message that comes before this error to determine the reason.
SOLUTION
Make sure the NetBackup master server specified in Recovery Manager for Oracle configuration
file is reachable. The specified NetBackup policy can be queried by using bppllist command
from the NetBackup master server, and a client name is assigned to the policy appropriately.
MESSAGE ID
1342
SYMBOLIC NAME
RMO_ERROR_LARGER_RETENTION
MESSAGE
3PAR1342: ERROR: The desired retention time '%s' is larger than the system's
VVRetentionTimeMax
value (%s hours) in HP 3PAR StoreServ Storage '%s'.
REASON
User specifies a retention time value larger than the maximum retention time allowed by the HP
3PAR Storage system.
SOLUTION
The retention time for a virtual copy cannot exceed the VVRetentionTimeMax value set at the
system level. Use HP 3PAR StroageServ Storage cli command showsys -param to check the
VVRetentionTimeMax
value, use a smaller retention time.
MESSAGE ID
1343
SYMBOLIC NAME
RMO_ERROR_SYSTEM_MAX_RETENTION
MESSAGE
3PAR1343: ERROR: Failed to retrieve the system level VVRetentionTimeMax value in HP 3PAR
StoreServ Storage '%s'.
REASON
The value of VVRetentionTimeMax parameter cannot be retrieved from the HP 3PAR Storage
system using showsys –param command.
SOLUTION
Trying to use HP 3PAR StorageServ Storage CLI command showsys -param failed. Make sure
the HP 3PAR StorageServ Storage is accessible and is running normally.
213