HP 3PAR Application Software Suite for Oracle - Manual (Page 162)

3PAR1050: ERROR: The alternate host <name> is the same as the backup system.
REASON
When running the rmora_export command, the alternate host cannot be the same as the backup
server.
SOLUTION
Change to use a different host as the alternate host.
MESSAGE ID
1054
SYMBOLIC NAME
RMO_ERROR_INVALID_ARGUMENT
MESSAGE
3PAR1054: ERROR: Invalid argument.
REASON
rmora_exec or tpdcli_exec received an invalid argument.
SOLUTION
Verify the configuration file contains all parameters up to date. Contact customer support for further
investigation.
MESSAGE ID
1055
SYMBOLIC NAME
RMO_ERROR_RMAN_SCRIPT
MESSAGE
3PAR1055: ERROR: RMAN script <name> not found.
Please run rmora_config first.
REASON
When backing up a Virtual Copy to media using RMAN, NetBackup could not find the required
script to do the RMAN backup This file should be automatically generated at the end of running
rmora_config
command.
SOLUTION
Run rmora_config again to generate the necessary files. Make sure to select Oracle RMAN as
the backup method.
MESSAGE ID
1060
SYMBOLIC NAME
RMO_ERROR_DESTROY_VXDG
MESSAGE
3PAR1060: ERROR: Could not destroy VxVM disk group <name>.
REASON
Operation fails when rmora_umount tries to destroy the VxVM disk group used by the specified
read-write virtual volumes and offline all VxVM disks for these volumes.
SOLUTION
Check if VXVM and DMP multipath configured correctly. Check if the configuration is in a valid
state. Also check if there are any stale volumes or disks, or invalid configurations. Contact customer
support for further investigation.
162 Troubleshooting