HP 3PAR Application Software Suite for Oracle - Manual (Page 171)

If there is no other backup process for this database running, remove the lock file <name> and try
again.
REASON
Some Recovery Manager for Oracle commands (create, backup, or rsync) are designed to be
executed sequentially. The command has to wait until the previous similar command finishes to
obtain a lock for its exclusive time.
SOLUTION
Try the operation at a later time. If you are certain that there are no similar operations going on,
remove the lock file specified on the screen as it could be a result from a previous inappropriate
or corrupted operation.
MESSAGE ID
1112
SYMBOLIC NAME
RMO_ERROR_UNKNOWN_BACKUP_MODE
MESSAGE
3PAR1112: ERROR: Unknown backup mode <mode>.
REASON
The error occurs when NetBackup calls the bpstart_notify.policy_name script. The script
finds out the backup mode is not recognized. The recognized mode are: online, offline, datafile,
or archlog.
SOLUTION
Check the bpstart_notify.policy_name file (policy name can be found from configuration
file; there is one for database, and an optional one for archive log only). Check the log file to see
if there are any errors. Contact customer support for further investigation.
MESSAGE ID
1113
SYMBOLIC NAME
RMO_ERROR_UNKNOWN_BACKUP_TYPE
MESSAGE
3PAR1113: ERROR: Unknown backup type <type>.
REASON
This error occurs in the bpstart_notify.policy_name file if the schedule type is not FULL,
INCR, or CINC.
SOLUTION
Check the policy setup in NetBackup and check the parameter settings in Recovery Manager for
Oracle configuration file. Make sure all parameters from the configuration file are up to date.
Contact customer support for further investigation.
MESSAGE ID
1114
SYMBOLIC NAME
RMO_ERROR_CHECKCONFIG
MESSAGE
3PAR1114: ERROR: Recovery Manager will not work until the problem is fixed.
REASON
171