HP XP Continuous Access Software - Manual (Page 104)

104 Continuous Access XP for the XP1024/XP128
NOTE: If you delete the Continuous Access XP Asynchronous volume pair, delete only the pair
containing the volume with the pinned track. To do this, select LU for Asynchronous Parameters,
and click Delete Range.
3. If the volume is offline (for example, S-VOL has a pinned track), vary the volume online.
4. Perform your usual procedure for recovering data from a pinned track. See the pinned track recovery
procedures for your operating system, or contact your HP account support representative for
assistance in recovering the pinned track.
5. If the volume was previously offline (for example, S-VOL), vary the volume offline again.
6. Restart the volume pair using the Paircreate command from the Pair Operation tab of the Continuous
Access XP main pane. From the Paircreate Parameter pane, select Entire for the Method field of the
Initial copy parameter (see ” Creating Continuous Access XP volume pairs (Paircreate) ” on page 81).