HP Designjet 8000 Printer series - Manual (Page 190)

Parameters:
● SOFTWARE — Settings in the RIP take priority.
● FRONT PANEL — Settings in the printer front panel take priority.
Print mode preference (PRINT MODE PREF)
Use this option to define printer front panel priority or software RIP priority for print mode settings for the
selected media type. If you select software RIP priority, the printer will ignore print mode settings that are
defined on the printer front panel and use the settings from the RIP.
Parameters:
● SOFTWARE — Settings in the RIP take priority.
● FRONT PANEL — Settings in the printer front panel take priority.
Heater preference (HEATER PREF)
Use this option to define printer front panel priority or software RIP priority for heater settings for the selected
media type. If you select software RIP priority, the printer will ignore heater settings that are defined on the
printer and heater front panels and use the settings from the RIP.
Parameters:
● SOFTWARE — Settings in the RIP take priority.
● HEAT PANEL — Settings in the printer front panel take priority.
Printhead rest period (PH REST PERIOD)
Use this option to define the number of passes the printhead carriage performs before it pauses for the
selected media type.
Parameters:
● CYCLES — Number of passes.
The front panel display asks the user to wait while a countdown readout shows how much rest time remains.
180 Chapter 14 Tell me about… (menus) ENWW
Tell me about… (menus)