HP Designjet 8000 Printer series - Manual (Page 195)

Parameters: none.
Replace wiper blade (REPLACE WIPER BLADE)
Use this option to lift the wiper blade so that you can replace it.
Parameters: none.
Replace wiper cleaning liquid (REPLACE WIPE LIQUID)
Use this option to lift the wiper blade so that you can replace it.
Parameters: none.
Replace wiper sponge (REPLACE WIPE SPONGE)
Use this option to access the wiper sponge so that you can replace it.
Parameters: none.
Washing the printheads (WASH PRINTHEADS)
Use this option to fill the cap with ink to soak the printhead (nozzle surface) in the ink for a minimum of 1
to 2 hours to remove nozzle clogging. If possible, leave the printer overnight.
Use this option when nozzles cannot be fixed by cleaning repeatedly.
Parameters: none.
NOTE Always perform Cleaning (normal) after filling the cap.
If the printhead surface is not clean even after leaving the printer overnight, then contact HP
Support.
ENWW The PH. MAIN menu 185
Tell me
ab
ou
t…
(
m
enu
s)