HP Designjet 8000 Printer series - Manual (Page 60)

● Make sure the take-up core is pushed firmly into both media hubs.
● If you need to feed more printing material from the printer, press the ONLINE key and then the
SHIFT key to display the FORM FEED option. Hold down the key to feed media.
1. Loosen the stop screw (1) on the left take-up reel assembly (2) and adjust the position for the width
of your core tube.
2. Insert the core tube (1) against the right media hub (2).
50 Chapter 3 How do I load/unload media ENWW
How
do
I load
/u
nlo
ad m
edi
a