HP Designjet 8000 Printer series - Manual (Page 67)

4 How do I… (printing topics)
● Perform a manual form feed/rewind
● Use manual nesting
● Increase/reduce pressure on media
Perform a manual form feed/rewind
This section describes how to manually feed or rewind media through the printing path, for example before
and after cutting media. By using these automatic features, you reduce the risk of skew when you perform
this task manually.
1. Press the ONLINE key.
2. Press the SHIFT key to display the FORM FEED and REWIND options.
3. To rewind or feed media, do one of the following:
a. Hold down the key to feed media forwards through the printing path.
While the key is pressed, the roll media advances. If cut sheet is loaded, it is discharged.
b. Hold down the key to rewind the media.
While the key is pressed, the roll media rewinds.
4. When the or key is released, media feeding or rewinding stops and the menu group is displayed.
ENWW Perform a manual form feed/rewind 57
Ho
w do
I… (
p
rint
ing
t
o
p
ics)