Load media on to the take-up reel – HP Designjet 8000 Printer series User Manual
Page 58
Advertising
Load media on to the take-up reel
If you are using a two-inch cardboard core, make sure you remove the core adaptors installed on the take-
up reel hubs as follows:
1.
Remove the adaptor ring (1) from the take-up reel right end plate.
2.
Insert the adaptor ring into the core adaptors on each take-up reel hub and turn anti-clockwise to
release.
48
Chapter 3 How do I load/unload media
ENWW
How
do
I load
/u
nlo
ad m
edi
a
Advertising