Two-factor authentication commands, Add ca certificate, Disable crl – HP Onboard Administrator User Manual
Page 34: Disable twofactor
Two-Factor Authentication commands 34
Two-Factor Authentication commands
ADD CA CERTIFICATE
•
Command:
ADD CA CERTIFICATE <end marker> <\n> <certificate> <\n> <end marker>
•
Description:
Adds a CA certificate on the command line. To add the certificate:
a.
Start with a string that does not appear within the certificate (the end marker).
b.
Insert a newline character by pressing Enter.
c.
Paste in the certificate.
d.
Insert a newline character by pressing Enter.
e.
Insert the end marker.
f.
Issue the command by pressing Enter.
Failure to give a proper end marker before and after the certificate might cause the interface to wait for
the appropriate end marker indefinitely.
•
Access level/Bay level:
OA administrator
•
Restrictions:
o
This command is only available in script mode.
o
When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048
bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.
DISABLE CRL
•
Command:
DISABLE CRL
•
Description:
Disables certificate revocation checks
•
Access level/Bay level:
OA administrator
•
Restrictions:
None
DISABLE TWOFACTOR
•
Command: