Set ldap name map, Set ldap gcport, Set ldap port – HP Onboard Administrator User Manual
Page 43: Set ldap search
Directory commands 43
o
Must be 0 to 58 characters in length.
o
Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces.
o
If the group name or description field contains spaces or zero characters, use double quotes.
SET LDAP NAME MAP
•
Command:
SET LDAP NAME MAP {ON|OFF}
•
Description:
Turns on NT name mapping to enable the user to enter their NT domain\username
•
Access level/Bay level:
OA administrator
•
Restrictions:
None
SET LDAP GCPORT
•
Command:
SET LDAP GCPORT { <port number> | NONE }
•
Description:
Sets the TCP port number of the LDAP Global Catalog SSL service. Port 3269 is the standard value.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The valid port number range is 1 to 65535.
SET LDAP PORT
•
Command:
SET LDAP PORT { <port number> | NONE }
•
Description:
Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The valid port number range is 1 to 65535
SET LDAP SEARCH
•
Command: