Airstream 390 - Manual (Page 52)

G
PLUMBING
G - 6
WATER PUMP
Manufacturer:
Aquatec
17422 Pullman Street
Irvine, CA 92614
800 975-9995
949 225-2200
Fax 949 225-2222
www.aquatec.com
Aquajet RV Series
This revolutionary pump employs state-of-the-art electronics to automatically control
motor speed the pump actually adjusts its speed as you open and close water fixtures.
The Aquajet RVs exclusive soft start feature eliminates annoying rapid cycling, and
its exclusive 5-valve design can deliver twice the flow and pressure conventional RV
industry pumps.
(Partial Reprint. Please contact Aquatec for complete instructions.)
Please read these Operational Guidelines before operating the AQUAJET RV PUMP. If
additional help is needed, please consult the Factory.
CAUTIONS:
A.The pump is equipped with an electrical speed controller; please insure that electrical
connections are made in accordance with these instructions.
B. The pump is equipped with a pressure sensing demand switch, which controls
the maximum operating pressure as set at the Factory. Never subject the pump to
pressures above 125 PST (9.5 bars).
C. Never operate the pump in a harsh environment or hazardous atmosphere, since
motor brush and switch may cause electrical arcing.
D. Pump head materials are designed for use with water only. Do not use with
petroleum products.
E. As long as there is inlet water pressure, the pump will not stop forward flow of water
even if the motor is turned off. Be sure the system has a positive means of shutting
off water supply.
F. Always consider electrical shock hazards when working with and handling electrical
equipment. If uncertain, consult an Electrician. Electrical wiring should only be done
by a qualified Electrician per local and State Electrical Codes.
Do not subject the pump to extreme high or low (freezing) temperatures while in
operation. (Operating ambient temperature range is 32º to 115º F).
The pump will only prime if all pressure is relieved from the outlet port