HP XP Racks - Manual (Page 131)

• About the Create Alert Setting Wizard , page 129
Setting the copy pair status monitoring conditions for each copy group
To set the conditions for monitoring copy pair status on a copy group basis:
1. If you intend to use SNMP traps to send alerts, first load the MIB definition files into the software
that will receive the traps.
For the location of the Replication Manager MIB definition files, see “ About MIB definition
files ” on page 422.
2. Display the information about the copy groups for which you want to set monitoring conditions.
For details on how to display this information, see the following:
• Viewing individual host information , page 297
• Viewing information about copy groups belonging to a host , page 299
• Viewing copy pair configuration definition information , page 275
• Viewing information about copy groups belonging to a copy pair configuration defini-
tion
, page 298
3. Select the check boxes of the copy groups for which you want to set monitoring conditions and
click Create Alerts. If the information about copy groups for which you want to set monitoring
conditions is already displayed, simply click Create Alerts.
The Create Alert Setting Wizard starts with the 1. Introduction page displayed.
If you select the Don’t show this message again check box, the 1. Introduction page will not be
displayed when the Create Alert Setting Wizard starts subsequently.
4. Read the wizard page, and then click Next.
The 2. Select Monitoring Type page appears.
5. Select the Pair Status Monitoring option and click Next.
The 3. Select Alert Setting page appears.
6. Select the Create New Alert Setting option and click Next.
The 4. Edit Alert Action page appears.
7. Specify the alert notification conditions and method.
You can also save these settings as a template or use an existing template.
8. Click Next.
The 5. Confirm page appears.
9. Confirm the settings that will be applied and click Confirm.
The 6. Finish page appears.
10. Click Finish.
The settings specified in the wizard are registered in the list of alert settings.
To view this list, from the Explorer menu, choose Alerts and then Alerts.
Related topics
• Monitoring pair statuses using alerts , page 277
• Setting the copy pair status monitoring conditions for each copy pair , page 132
User Guide 131