HP XP Racks - Manual (Page 201)

Copy type: Cnt Ac-A/Cnt Ac-J
Remarks
Default
value Specifiable val-
ues
Item specified Options
Pair com-
mand
Forward: The SUSPOP status is set so that the
copy direction after re-synchronization is from
the primary site to the secondary site.
Reverse: The SUSPOP status is set so that the
copy direction after re-synchronization is from
the secondary site to the primary site.
Notes:
• This option cannot be specified if the oper-
ation target is a copy pair or a C/T Group.
This option can be specified when the op-
eration target is a copy group.
• Either the Direction option or the Synchron-
ization option needs to be specified for the
split command. (Both options cannot be
specified at the same time.)
Blank
Forward, Re-
verse
The copy direc-
tion of the pair
when re-synchron-
ization is per-
formed.
Direction
split
Flush: The copy pair is suspended after the data
is synchronized.
Purge: The copy pair is suspended at the
moment that a suspend request is issued, even
when there is data that has not been
synchronized yet.
Notes:
• Either the Direction option or the Synchron-
ization option needs to be specified for the
split pair command. (Both options cannot
be specified at the same time.)
• When a split operation is performed on Cnt
Ac-J pairs or C/T groups, Purge cannot be
selected.
• The Flush option is not displayed when the
following two conditions are both satisfied:
- The operation target is Cnt Ac-A.
- The primary volume is in the remote site.
In this case the default value of the Syn-
chronization is ”Purge”.
Flush Flush, Purge
Whether to sus-
pend the copy
pair after the data
is synchronized.
Synchron-ization
Force
User Guide 201