HP XP Racks User Manual
Page 183
5.
Define a list of copy pairs that you want to include in the pair group, by selecting the primary
and secondary volumes in the Candidate List pane. For details on how to define copy pairs, see
“
Creating pairs and pair groups
The defined copy pairs are displayed in the Pair List pane.
6.
Repeat steps 4 and 5 to create additional pair groups.
You can click the
icon or the
icon to expand the Candidate List and Pair List display
areas.
7.
Click Next.
The 3. Group Management page appears.
8.
Select the copy group you want to edit and the pair group to be associated with the copy group,
and then click Apply.
The pair group registered on the 2. Pair Association page is assigned to the copy group.
9.
Click Next.
The settings specified in the above steps are listed as tasks that correspond to copy groups on
the 4. Task Management page.
10.
Click Next.
The 5. Confirm page appears.
11.
Confirm the configuration definition and tasks for the copy pairs you have specified, and then
click Confirm.
The 6. Finish page appears.
12.
Click Finish.
The settings specified in the wizard are registered as tasks and a workflow. If a workflow was
temporarily saved earlier because it was incomplete, that workflow is overwritten.
13.
To view the list of tasks, from the Explorer menu, choose Tasks and then Tasks. A list of tasks is
displayed in the Tasks subwindow.
Related topics
• Associating pair groups with copy groups
Conditions for copy types to be displayed (open systems)
The copy types displayed in the Copy Type drop-down list differ depending on the storage system
type or the copy types set to existing copy groups.
A copy type is displayed when the license for that copy type, which is registered in the storage system
to which the primary volume belongs, is enabled.
•
Cnt Ac-J (3DC Delta Resync) is displayed if all the following conditions are satisfied:
•
A multi-target configuration that uses Continuous Access Synchronous and Continuous Access
Journal is defined.
•
The copy type is Continuous Access Synchronous, and the secondary volume of the copy group
that is the base for a multi-target configuration is selected.
•
The selected copy group has the same number of copy pairs as belong to a Continuous Access
Journal copy group.
•
The storage system for the selected copy group differs from that for a Continuous Access Journal
copy group.
User Guide
183