HP XP Racks - Manual (Page 260)

Disabling the Device Manager refresh function
In open systems where all copy pairs are managed by pair management servers, you should prevent
the Device Manager refresh function from executing during a manual refresh. If this function is used
to refresh copy pair statuses, processing time increases.
TIP:
If copy pairs have been defined using storage system operation management software such as Remote
Web Console, no configuration definition file exists. This means there are copy pairs not managed
by pair management servers.
You can also disable the Device Manager refresh function during automatic refreshing. For details,
see “
Refreshing the copy pair status automatically for each information source ” on page 262.
To disable the Device Manager refresh function:
1. From the Explorer menu, choose Settings and then Refresh Setting.
The Refresh Setting subwindow appears.
2. Click the Monitoring Setting link.
The Monitoring Setting subwindow appears.
3.
Click the icon of the information source for which you want to disable the Device Manager
refresh function.
The Edit Interval of Refresh Pair Status - information-source-name dialog box appears.
Refreshing management information 260