Adding pair management server nodes, Deleting pair management server nodes, 36 adding pair management server nodes – HP XP Racks User Manual
Page 36: 36 deleting pair management server nodes
2.
Enter the Group Name.
3.
Select the Site and Server Name for the primary and secondary pair management servers. (Select
Others for storage systems that are not assciated with a site.)
4.
Select or specify an Instance number. (You must provide a UDP Port if you specify an instance
number.)
5.
Click Add to register the pair management server combination that manages the configuration
file.
6.
To delete one or more entries from the Pair Management Server List, select them and click Delete.
7.
You can select an MU Number, or use the Auto setting.
Registering redundant pair management servers manually
If you are constructing the redundant pair management server configuration manually, be sure and
do the following:
1.
Use a P9000 RAID Manager command to change the configuration of the copy pair.
2.
Set up the HORCM configuration files so that each primary HORCM file has all secondary targets
and vice versa.
3.
In the Storage System view of Replication Manager, select the storage system where the operations
were performed and click Refresh Storage System Information.
CAUTION:
If the redundant configuration definition files have different copy group or copy pair names, the error
message RPM-00045 is displayed when the Pair Configuration Wizard is started. Redundant
configurations must have the same copy group or copy pair name.
Adding pair management server nodes
You can register additional primary and secondary pair management servers (nodes) when modifying
an existing copy group from the Group Management page of the Pair Configuration Wizard:
1.
Click Add Node.
2.
To add a new node, select the Site and Server Name for the primary and secondary pair
management servers. (Select Others for storage systems that are not assciated with a site.)
3.
Select or specify an Instance number. (You must provide a UDP Port if you specify an instance
number.)
4.
Click Add to register the new pair of pair management server nodes that manage the configuration
file.
5.
To delete one or more entries from the Pair Management Server List, select them and click Delete.
Deleting pair management server nodes
You can delete primary and secondary pair management servers (nodes) when modifying an existing
copy group from the Group Management page of the Pair Configuration Wizard:
1.
Click Delete Node.
2.
Select one or more entries from the Pair Management Server List and click Delete.
Getting started
36