Step 7: test copy functionality, Step 8: test the fax functionality, Step 9: check the toner cartridge – HP LaserJet Pro M521 Multifunction Printer series User Manual

Page 174: Step 10: try sending a print job from a computer, Step 11: verify that the product is on the network

Advertising
background image

Step 7: Test copy functionality

1.

Place the configuration page into the document feeder and make a copy. If paper does not feed

smoothly through the document feeder, you might need to clean the document feeder rollers and

separation pad. Make sure the paper meets specifications for this product.

2.

Place the configuration page onto the scanner glass and make a copy.

3.

If the print quality on the copied pages is not acceptable, clean the scanner glass and the small

glass strip.

CAUTION:

Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the product; these can damage the product. Do not place liquids

directly on the scanner glass. They might seep and damage the product.

Step 8: Test the fax functionality

1.

From the Home screen on the product control panel, touch the Setup button.

2.

Open the following menus:

Service

Fax Service

3.

Touch the

Run Fax Test

button to print the Fax Test Report, which provides information about fax

functionality.

Step 9: Check the toner cartridge

Print a supplies status page and check remaining life of the toner cartridge.

1.

From the Home screen on the product control panel, touch the Supplies button.

2.

Touch the

Report

button to print the supplies status page.

Step 10: Try sending a print job from a computer

1.

Try printing the job from another computer that has the product software installed.

2.

Check the USB or network cable connection. Direct the product to the correct port, or reinstall the

software, selecting the connection type that you are using.

3.

If the print quality is unacceptable, verify that the print settings are correct for the paper that you

are using.

Step 11: Verify that the product is on the network

For networked products, open a Web browser, and enter the product IP address (from the previously

printed configuration page) in the address box to open the HP Embedded Web Server (EWS). If the

HP EWS does not open, reinstall the product on the network.

160

Chapter 9 Solve problems

ENWW

Advertising