HP LaserJet Pro M521 Multifunction Printer series - Manual (Page 56)

Change print-job settings (Windows)
● Priority for changing print-job settings
● Change the settings for all print jobs until the software program is closed
● Change the default settings for all print jobs
● Change the product configuration settings
Priority for changing print-job settings
Changes to print settings are prioritized depending on where the changes are made:
NOTE: The names of commands and dialog boxes might vary depending on your software program.
● Page Setup dialog box: Click Page Setup or a similar command on the File menu of the
program you are working in to open this dialog box. Settings changed here override settings
changed anywhere else.
● Print dialog box: Click Print, Print Setup, or a similar command on the File menu of the
program you are working in to open this dialog box. Settings changed in the Print dialog box
have a lower priority and usually do not override changes made in the Page Setup dialog box.
● Printer Properties dialog box (print driver): Click Properties in the Print dialog box to
open the print driver. Settings changed in the Printer Properties dialog box usually do not
override settings anywhere else in the printing software. You can change most of the print settings
here.
● Default print driver settings: The default print driver settings determine the settings used in all
print jobs, unless settings are changed in the Page Setup, Print, or Printer Properties dialog
boxes.
● Product control-panel settings: Settings changed at the product control panel have a lower
priority than changes made anywhere else.
Change the settings for all print jobs until the software program is
closed
The steps can vary; this procedure is most common.
1. From the software program, select the Print option.
2. Select the product, and then click Properties or Preferences.
42 Chapter 4 Print ENWW