HP Color LaserJet 5500 Printer series - Manual (Page 49)

10. Press or to select ALWAYS or UNLESS LOADED.
11. Press to set the behavior.
12. Press P AUSE /R ESUME .
PowerSave Time
The adjustable PowerSave Time feature reduces power consumption when the printer has
been inactive for an extended period. You can set the length of time before the printer goes
into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 1 HOUR, 1.5 HOURS,
2 HOURS, or 4 HOURS. The default setting is 30 MINUTES.
Note The printer display dims when the printer is in PowerSave mode. PowerSave mode does not
affect printer warm-up time unless the printer was in PowerSave mode for more than 8 hours.
To set PowerSave Time
1. Press to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight POWERSAVE TIME.
7. Press to select POWERSAVE TIME.
8. Press or to select the appropriate time period.
9. Press to set the time period.
10. Press P AUSE /R ESUME .
To disable/enable PowerSave
1. Press to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight RESETS.
5. Press to select RESETS.
6. Press to highlight POWERSAVE.
7. Press to select POWERSAVE.
8. Press or to select ON or OFF.
9. Press to set the selection.
10. Press P AUSE /R ESUME .
EN_WW Changing printer control panel configuration settings 39