HP Color LaserJet 5500 Printer series - Manual (Page 50)

Personality
This printer features automatic personality (printer language) switching.
•
AUTO configures the printer to automatically detect the type of print job and configure
its personality to accommodate that job.
•
PCL configures the printer to use Printer Control Language.
•
PS configures the printer to use PostScript emulation.
To set the personality
1. Press to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight PERSONALITY.
7. Press to select PERSONALITY.
8. Press or to select the appropriate personality (AUTO, PS, PCL).
9. Press to set the personality.
10. Press P AUSE /R ESUME .
Clearable warnings
You can determine the display time of control panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
•
ON displays clearable warnings until you press .
•
JOB displays clearable warnings until the end of the job in which it was generated.
To set the clearable warnings
1. Press to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight clearable_warnings.
7. Press to select clearable_warnings.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press P AUSE /R ESUME .
40 Chapter 2 Control panel EN_WW