Solution 6: contact hp support – HP Photosmart Premium Fax C309 User Manual
Page 113
•
If the lines are jagged, align the printer, and then print this diagnostic page again.
Alignment pattern - jagged lines
NOTE:
If aligning the printer does not solve this print quality issue, contact HP support for service.
Cause: The printhead needed to be cleaned.
If this did not solve the issue, try the next solution.
Solution 6: Contact HP support
Solution: Contact HP support for service.
Go to
If prompted, choose your country/region, and then click Contact HP for information on calling for technical
support.
Cause: There was a problem with the printhead.
The printout has a horizontal band of distortion near the bottom of a
borderless print
Try the following solutions if your borderless print has a blurry band or line on the bottom of it.
NOTE:
For this issue, there is not a problem with your ink supplies. Therefore, replacing the ink cartridges or
printhead is not necessary.
•
Solution 1: Check the paper type
•
Solution 2: Use a higher print quality setting
•
Solution 1: Check the paper type
Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced
Photo Paper.
Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place.
When you are ready to print, remove only the paper you plan to use immediately. When you have finished
printing, return any unused photo paper to the plastic bag. This will prevent the photo paper from curling.
For more information, see:
•
Recommended papers for printing
•
Cause: The wrong kind of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.
Print quality troubleshooting
111
Solve a problem