HP Photosmart Premium Fax C309 - Manual (Page 194)

Solution 3: Push the memory card all the way forward
Solution: Remove the memory card and reinsert it in the memory card slot until it stops.
Cause: You had not fully inserted the memory card.
Use only one card at a time
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, the attention light will blink rapidly, and an error message will appear
on the computer screen. Remove the additional memory card to resolve the problem.
Cause: There were two or more memory cards inserted into the product at the same time.
Card is inserted incorrectly
Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then
push the card forward into the appropriate slot until the Photo light turns on.
If the memory card is not inserted properly, the product will not respond and the attention light will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for a few seconds, and then
remain lit.
Cause: You had inserted the memory card backwards or upside down.
Card is damaged
Solution: Reformat your memory card in your camera or format your memory card in a Windows XP computer
by selecting the FAT format. For more information, see the documentation that came with your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the card. If you have previously
transferred the photos from your memory card to a computer, try printing the photos from the computer.
Otherwise, you will need to retake any photos you might have lost.
Cause: You formatted the card on a Windows XP computer. By default, Windows XP will format a memory
card of 8 MB or less and 64 MB or more with the FAT32 format. Digital cameras and other devices use the FAT
(FAT16 or FAT12) format and cannot recognize a FAT32 formatted card.
Card is not fully inserted
Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then
push the card forward into the appropriate slot until the Photo light turns on.
If the memory card is not inserted properly, the product will not respond and the attention light will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for a few seconds, and then
remain lit.
Cause: You had not fully inserted the memory card.
Paper messages
The following is a list of paper-related error messages:
• Ink is drying
Chapter 13
192 Solve a problem
Solve a problem